Kontakt

Zentrale München:
Ölbergring 30a
83620 Feldkirchen
Tel.: +49 (8063) 973 70 - 0
Fax: +49 (8063) 973 70 - 10

Standort Schweinfurt:
Lindestr. 12a
97469 Gochsheim
Tel.: +49 (9721) 730 88 - 0
Fax: +49 (9721) 730 88 - 19

Smartic M – The portable surface-measuring device

The portable measurement device Smartic M, with an integrated evaluation unit and an interchangeable free-probe system, combines mobility with highly accurate measurements according to the following standards: ISO 4287, ISO 13565, ISO 12085, DIN 4768, VDA 2007, JIS B0671, JIS B0601, JIS, B0631, ASME B46.1. Through the high resolution 7-inch touchscreen and membrane keyboard, and thus easy handling with small dimensions, it can be used in the measuring room as well as on the production line. The device has an error-detection system in the form of an overflow warning if the sensing device is not resting on the surface or if there is overly-high pressure on the sensing device.

The large internal memory offers space for a multitude of measurements. The measurements are stored and logged via the built-in USB interface directly on a printer or PC. Measured data can be saved on a USB stick. Software updates take place fully automatically via a USB update stick. The supplied probe head with changeable probe arms is used as free sensing device or, with mounted sliding protection, as a standard “running” sensing device. Other sensing devices with different offsets, e.g. for small holes or deep grooves, are available.

smartic_m
  • For portable and stationary use
  • Easy-to-use interface via large, high-resolution, 7-inch touchscreen
  • Free sensing system for flexible measuring tasks
  • 90° sensor arm pivot for measurements in
  • The direction of rotation in cylinders/drill holes
  • Large measured value memory with 4000 measurements/1000 profiles
  • Automatic, standard-based detection of cut-off
  • Entry and definition of the parameters
  • Mini contour evaluation up to 3 mm (Z), 60 mm
  • Dimensions (H x L x W) 85 x 280 x 75 mm
  • Battery and mains operation

Download:  030-103_Rauheit

RTP 80 - Das industrielle Oberflächenmessgerät

The RTP80 surface-measuring device with integrated printer is designed for the measurement and evaluation of surface roughness in accordance with the following standards: ISO 4287, ISO 12085 (MOTIF or CNOMO), DIN, ASME, JIS. Thanks to a membrane keyboard, easy handling and small dimensions, it can be used in the measuring room as well as on the production line. The device has a warning and error-detection system. It warns and blocks all erroneous settings during set-up and measurement. The internal memory of 400 kb offers space for a multitude of measurements. It has two memory modes: Memo and Statistical. In Memo mode, the measurements are stored in order to log and/or print them. Up to 12 parameters can be saved for each measurement; these can be displayed and printed as graphics or as a histogram. PC-connection via RS232 interface.

RTP80
  • Easy operation via 6-inch touchscreen
  • Integrated printer for fast and easy logging
  • Free sensing system for flexible measuring tasks
  • Intelligent fault detection by warning in the case of incorrect settings
  • TS7 feeders (measurement range 25 mm) and TL90 feeders (measurement range 50 mm) can be connected
  • Integrated memory of 400 Kb
  • Excellent as a retrofit system for older feeders (e.g. PRK)
  • Battery and mains operation

RT10 - The mobile surface-measurement device

The RT10 mobile surface-measurement device for the measurement and analysis of roughness parameters, at the production site itself. Incl. practical accessories in a case, such as prism mounting, feet, standard battery, sensing device guard, PC interface.

RT10
  • Handy, small roughness-measurement device for mobile use on the production line
  • Robust “running” sensing system
  • Operation via standard, rechargeable batteries
  • Measurement path up to 16 mm
  • Measuring sensor can be rotated 90° (transverse sensing)